Company of Heroes: Eastern Front

Author Topic: 2p_Malgobek v1.0  (Read 4322 times)

Offline Raelity

  • Donor
  • Ingenery
  • *
  • Posts: 36
    • View Profile
2p_Malgobek v1.0
« on: February 09, 2011, 05:42:54 PM »
Hey, this is the first map I've made for CoH and its an Eastern Front map as I always play EF over vCoh. It's based on the Russian town of Malgobek which was awarded 'City of Military Glory' by Putin for holding the German advance at its borders.

It needs a bit more detail and it may have some balance issues (you tell me  :)) but the main idea is two tight urban areas separated by a strip of open ground containing the higher resources, Sorry the screenshots are so tiny, will look into that. Let me know what you think. 

http://www.mediafire.com/?91y6e7z3bc58f5e



















« Last Edit: February 09, 2011, 06:29:07 PM by Raelity »

Offline Raelity

  • Donor
  • Ingenery
  • *
  • Posts: 36
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #1 on: February 14, 2011, 03:30:23 PM »
Someone must have tried it by now :)

Offline BurroDiablo

  • Developer
  • Poster of the Soviet Union
  • *
  • Posts: 3976
  • NYET!
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #2 on: February 14, 2011, 03:34:53 PM »
Not yet, looks good from what I can see on those minuscule pictures, quite a tourney map. Will give it a shot soon.

Offline cyhyryiys

  • Ingenery
  • *
  • Posts: 37
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #3 on: March 19, 2011, 12:05:46 PM »
looks nice, but

it crashs after ~10min i play

this happened 3 times.

My pc system should be good enough and i normaly have no problems with crashes.


Offline cyhyryiys

  • Ingenery
  • *
  • Posts: 37
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #4 on: April 13, 2011, 02:25:09 PM »
hm is there some hope this could be fixed? :)

Offline Mystic-Car

  • Developer
  • Guard
  • *
  • Posts: 206
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #5 on: April 13, 2011, 06:40:50 PM »
Minimap looks pretty nice.
But you´re right, the map isn´t detailed enough for EF, yet ;-)

Regards,
Mystic

Offline Cranialwizard

  • Donor
  • Poster of the Soviet Union
  • *
  • Posts: 3270
  • Unknown Soldier
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #6 on: April 14, 2011, 02:03:27 AM »
Very nice map, well balanced, did you intentionally seal off the High Ammo at the south end of the map? I needed to use my mortars to break through the fence :)

The same problem happened to me. About 15 minutes in the game crashed. Not sure what happened, but it's defiantly the map.

Overall good work, needs a bit more detail, but the crashing is a big issue.
"Balancers are 10 a penny"

Offline Raelity

  • Donor
  • Ingenery
  • *
  • Posts: 36
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #7 on: May 28, 2011, 11:41:33 PM »
Hey, I haven't given up yet. University work got in the way of this map, but I'll be on my summer holiday in a couple of weeks (3 months off ftw :D) and I'll be able to finish off this one, fix the crash problem and add more detail, and continue work on a 2 vs 2 map I also have in the pipeline.

Offline cyhyryiys

  • Ingenery
  • *
  • Posts: 37
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #8 on: May 31, 2011, 08:48:18 AM »
nice to read, i would like to play this map till end :-)

Offline Raelity

  • Donor
  • Ingenery
  • *
  • Posts: 36
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #9 on: June 01, 2011, 08:18:09 PM »
Has anyone come across this type of crashing before? Or does anyone have an idea what might be causing it and what I can do to fix it. I really don't know how to identify the problem.

Oh and yes I did chose to block of the southern high munitions point until you can destroy the barbed wire, if you look close you can see the halftrack has crashed across the entrance to the base. It was just an odd idea that came into my head I wasn't sure how people felt about it. Interesting or annoying?



Post Merge: June 02, 2011, 10:25:44 AM
Here are the warning log files from the start of the game to the crash, hopefully someone can see something there which might identify the crash. I can put up the other logs if anyone thinks it would be useful.

09:14:33.66   Warning: binding repeat_2(Ability: abilities\reenable_capture_ability_pe_schwimmwagen) -- ui index '0' out of bounds; range is [1, 12]
09:14:33.70   Warning: binding repeat_4(Ability: abilities\repair_ability_pe_improved_bike) -- widget 'command_ability_button_06' already occupied by 'repeat_3:Ability: abilities\repair_ability_pe_bike'
09:14:34.30   Warning: non auto-match upgrade not found in AE, tuning
09:14:35.01   local host PeerID 1 CONN ack=  0 (  0ms~0) unack=  0, retry=  0, highwaterOOS=0 @WINaddr:10.202.160.63:6112; (ping=0ms) 100.00%, pending=0, dead=0
09:14:35.01   MessageCounts: inval=0/0, seek=0/0, join=0/0, integ=0/0, seek_reply=0/0, join_reply=0/0, add=0/0, remove=0/0, drop=0/0, data=0/0, voice=0/0, rchk=0/0, nudge=0/0, peerhdr=0/0, proxy=0/0, ping=0/0, frag=0/0, Errors=0/0
09:14:47.32   Activating screen: Command_Tree
09:14:48.76   Activating screen: Command_Branch
09:15:02.00   Transport - median kBPS [hi/cur] sent = 0.1/0.0, recvd = 0.1/0.0, #p/sec[s/r] = 0.0/0.0, max unsent 0, version err 0, merge 0
09:15:06.00   Warning: binding repeat_1(Ability: abilities\reenable_capture_ability_engineers) -- ui index '0' out of bounds; range is [1, 12]
09:15:06.00   Warning: binding repeat_3(Ability: abilities\repair_ability_pe_improved) -- widget 'command_ability_button_06' already occupied by 'repeat_2:Ability: abilities\repair_ability_pe'
09:15:36.01   local host PeerID 1 CONN ack=  0 (  0ms~0) unack=  0, retry=  0, highwaterOOS=0 @WINaddr:10.202.160.63:6112; (ping=0ms) 100.00%, pending=0, dead=0
09:15:36.01   MessageCounts: inval=0/0, seek=0/0, join=0/0, integ=0/0, seek_reply=0/0, join_reply=0/0, add=0/0, remove=0/0, drop=0/0, data=0/0, voice=0/0, rchk=0/0, nudge=0/0, peerhdr=0/0, proxy=0/0, ping=0/0, frag=0/0, Errors=0/0
09:16:03.00   Transport - median kBPS [hi/cur] sent = 0.1/0.0, recvd = 0.1/0.0, #p/sec[s/r] = 0.0/0.0, max unsent 0, version err 0, merge 0
09:16:37.00   local host PeerID 1 CONN ack=  0 (  0ms~0) unack=  0, retry=  0, highwaterOOS=0 @WINaddr:10.202.160.63:6112; (ping=0ms) 100.00%, pending=0, dead=0
09:16:37.00   MessageCounts: inval=0/0, seek=0/0, join=0/0, integ=0/0, seek_reply=0/0, join_reply=0/0, add=0/0, remove=0/0, drop=0/0, data=0/0, voice=0/0, rchk=0/0, nudge=0/0, peerhdr=0/0, proxy=0/0, ping=0/0, frag=0/0, Errors=0/0
09:17:04.01   Transport - median kBPS [hi/cur] sent = 0.1/0.0, recvd = 0.1/0.0, #p/sec[s/r] = 0.0/0.0, max unsent 0, version err 0, merge 0
09:17:38.01   local host PeerID 1 CONN ack=  0 (  0ms~0) unack=  0, retry=  0, highwaterOOS=0 @WINaddr:10.202.160.63:6112; (ping=0ms) 100.00%, pending=0, dead=0
09:17:38.01   MessageCounts: inval=0/0, seek=0/0, join=0/0, integ=0/0, seek_reply=0/0, join_reply=0/0, add=0/0, remove=0/0, drop=0/0, data=0/0, voice=0/0, rchk=0/0, nudge=0/0, peerhdr=0/0, proxy=0/0, ping=0/0, frag=0/0, Errors=0/0
09:18:05.00   Transport - median kBPS [hi/cur] sent = 0.1/0.0, recvd = 0.1/0.0, #p/sec[s/r] = 0.0/0.0, max unsent 0, version err 0, merge 0
« Last Edit: June 02, 2011, 10:25:44 AM by Raelity »

Offline Raelity

  • Donor
  • Ingenery
  • *
  • Posts: 36
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #10 on: June 14, 2011, 05:20:04 PM »
I've tried every fix I can think of and I still can't crack the crashing problem, unless anyone has any suggestions I may not have tried yet I'm going to have to scrap this map.

Offline cyhyryiys

  • Ingenery
  • *
  • Posts: 37
    • View Profile
Re: 2p_Malgobek v1.0
« Reply #11 on: June 15, 2011, 02:27:06 PM »
that would be sad. hope someone might help you with this error :(